Asus ez update 2.00.151/5/2023 ![]() ![]() ![]() ![]() For most users, it is recommended that you don't fix something that isn't broken, to paraphrase an adage. If BIOS fails due to a bad flash, a physical switch on the board can be toggled to enable the backup BIOS chip. To update firmware, the board must first wipe the existing blocks housing the firmware, then apply the update block-by-block to the flash device.įailure or power loss during the 'wipe' phase will likely result in catastrophic failure - or unrecoverable corruption to the Flash memory. The reason that flashing firmware can brick a board is because there exist no consumer means to recover a corrupted firmware chip. Note that many high-end boards - like - offer a 'dual-BIOS' feature. Also note that flashing BIOS will wipe all settings, so it is recommended that you write down any overclocking settings before proceeding. We would also advise opting for a wired connection. In the event your board does not do this, but instead requires a constant internet connection, it is advisable not to disconnect your wire during the update. When updating via internet, most boards will store the update locally, wipe the old firmware, and then apply the update. Do not disconnect power at any time during this process. Warnings & Notes Abrupt power loss or power disruption by the user can brick the board - meaning it will be as useful as a brick when it comes to computing. The most recent version of your board's BIOS, found from the manufacturer's site.A board with simplified firmware flashing software. ![]() Video Tutorial: How To Flash BIOS with an ASUS Board Setup & Necessary Tools Do I need that driver to ensure that my EZ_Plug is doing the best it can for my GPU's? On the ASUS Driver page, there is an update for the EZ_Plug (see the italics below). Note that some modern board manufacturers (MSI and ASRock both included) will also allow BIOS flashing over ethernet or wireless connection, though USB is still the easiest and safest method. We used an ASUS Crosshair V in this guide, but the steps apply to any other E-Z Flash-equipped board. This quick tutorial shows how to flash your firmware (update BIOS) using any modern ASUS board. The widespread adoption of UEFI in modern motherboards means that usability has been substantially improved, and with that in mind, flashing no longer requires a bootable CD with command prompt loaded. At least, that was my experience when working with pre-UEFI motherboards in a lab environment. Flashing firmware used to be a sort-of haphazard process that often resulted in bricked motherboards. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |